Wheels

- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed (Red), Campagnolo 10/11 Speed (Blue) - Material: Aluminum

ZIPP 404 W ALLOY RIM 650C 10S SRAM/SHIMANO

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Spoke kits for repair of RaceFace wheels.

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061

19MM x 55mm 700c CARBON TUBULAR REAR WHEEL

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, white surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

Tubeless valves for DT Swiss rims for repair or replacement.

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

These wheel skewers are designed to blend seamlessly into the bike for faster aerodynamics. No matter what happens, these original replacements will get them working like new. Key features - Proprietary Speed Concept design integrates into the bike for faster aerodynamics - When seconds matter, details matter. Demand the fastest skewers for your bike

These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service

This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Tape is designed for wider Plus and Fat wheels - Can also be used as a universal tubeless solution for non-Bontrager rims - Use only with Bontrager TLR rim valve with round base - Rim tape replacement is recommended if removed from the wheel - One roll is 5m (197") in length

SHIMANO / SRAM 10 SPEED

Protect your wheels! Each wheel slips into an individually padded pocket. The bag features additional placements and a stuff sack for race supplies like quick releases, CO2 cartridges, mini-pump, spare valve extenders or tubes. The exterior is surrounded by a thick layer of high-density foam to soak up bumps, and the 1200-denier ballistic nylon cover resists punctures and tearing. Includes a removable and adjustable shoulder strap, non-removable padded hand strap and a mesh ID pocket with key clip. Key Features: Tough nylon fabric is rip and tear resistant with reinforcing around the hubs. Carry handles for convenience. Zipp logo.

The Disc version of the Team30 brings an affordable semi-aero wheel to the latest generation of disc brake-equipped bikes. Construction is very similar to the rim brake Team30, with 30mm deep aluminum rims and CNC machined hubs with sealed cartridge bearings. Disc brakes put very different loads on wheels than rim brakes, so the Team30 Disc is beefed up with more spokes 24 front, 24 rear. 2-cross lacing at the front and a mix of 2- and 3-cross at the back deals with the torque demands of disc brakes. Alloy 30mm depth rim Tubeless ready / Clincher CNC machined aluminum hubs 4 sealed chromoly cartridge bearings Aero bladed DP spokes Artisan built, entirely by hand

700C ALUMINUM RIM BLADED SPOKE CLINCHER WHEELSET RIM BRAKE 11 SPEED

700c CLINCHER ALUMINUM WHEEL SET

Touring cyclists have known theses wheels for a decade, noting their durability, simplicity, and ease of service. They're a great choice for all-condition roads.

Designed with features and technologies that are typically reserved for premium race wheels, Aksium delivers quality performance for everyday road riding. Features include straight-pull spokes for added strength and stiffness, and lightweight rims for a lively ride quality. The rims are now wider, which allows for increased air volume and a better fit for larger diameter tires (up to 32mm). The hubs are incredibly tough, delivering high mileage and long-lasting dependability. And the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Weight : 845 grams (Front) TIRE AND TUBE INCLUDED

The Mavic Cosmic Elite Clincher Wheelset is an aerodynamic design for road racers and triathletes. Light and efficient, the Cosmic Elite features deep and wide rim extrusions for optimal power transfer.

700C WHEEL Rim Material: S6000 Aluminum TUBELESS

With a major step up, Mavic Ksyrium Pro UST wheelset now has super lightweight road tubeless alloy wheels and Yksion Pro UST tires for rolling efficiency, pinch flat protection and easy mounting. Features Inter Spoke Milling 4 Dimensions (ISM 4D) technology removes excess material where it's unnecessary to keep rim weights as low as possible Fore drilling only affects the inner wall of the rim, allowing for a stiffer and more durable rim and eliminating the need for rim tape UST Tubeless compatibility allows for safe, fast and easy set up of a road tubeless system—just add included sealant to each wheel and you are done UST Tubeless wheels have lower rolling resistance and are less likely to go flat after a puncture Yksion Pro UST tires offer low rolling resistance and superior grip thanks to the 11 Storm compound and UST compatibility

CARBON CLINCHER RACING LIGHT 700 C 10 SPEED RIM BRAKE CARBON WHEELSET INCLUDED: WHEEL COVERS